Storage And Retrieval Of The Scene Files - Sony SRW-9000 Operation Manual

To store the data as a lens file in built-in
memory
As required, set the items marked with "√" in the
L column of the table in "List of Items Stored in
Files" (page 172) to the state that you want to
store.
1
For a non-serial lens, select the No. (file
number), and set the NAME (lens
name) and the F NO (minimum f-stop).
For details about setting file names, see
"Specifying a character string" (page 115).
Note
This step is not required for a serial lens
because these settings are made
automatically.
2
Move the cursor to STORE FILE and
press the MENU SEL/ENTER dial.
Storage of the position settings for the center
marker can be performed independently.
You can check the effect of the WHITE R/B
compensation that has been set in the file, by
changing the setting for WHITE R/B to OFF.
Note
The WHITE R/B item is provided only for checking the
effect of compensation (comparison between when the
file is used and not used). The file cannot be stored with
WHITE R/B set to OFF.
To write the date or retrieve it from a
"Memory Stick"
Move the cursor to LENS MS READ/WRITE
and press the MENU SEL/ENTER dial. The
following subpage appears.
176 File Operations
To store
Move the cursor to WRITE (CAM t MS) and
then press the MENU SEL/ENTER dial.
You can add a comment (maximum length: 14
characters) to be saved with the lens file on the
"Memory Stick" by specifying it on the FILE ID
line.
For details on how to enter a comment, see
"Specifying a character string" (page 115).
To retrieve
Move the cursor to READ (MS t CAM) and
then press the MENU SEL/ENTER dial.
Storage and Retrieval of the
Scene Files
Use the <SCENE FILE> page of the FILE menu
or the PAINT menu.
To store a scene file in built-in memory
Set the items for the scene file you wish to store.
1
Move the cursor to STORE and press
the MENU SEL/ENTER dial.
2
Move the cursor to the number of the
file in which you wish to store your
settings and press the MENU SEL/
ENTER dial.
During the storage process, "MEMORY STICK
ACCESS" is displayed.
When storage is completed, "COMPLETE"
appears.
To retrieve a scene file stored in built-in
memory
Move the cursor to the number of the file that you
wish to retrieve and press the MENU SEL/
ENTER dial.