Upper Panel - Sony SRW-9000 Operation Manual

MIC: When an external microphone is connected
(no power is supplied.)
MIC +48V ON: When an external microphone is
connected (+48 V power is supplied)
j HD SDI OUT A/B connectors (BNC
type) and ON/OFF switch (when the
HKSR-9001 is installed)
When the switch is set to ON, HDSDI signals are
output from the A and B connectors. When the
switch is set to OFF, no signals are output.
See "What Is Dual Link?" (page 166) for more
information about HDSDI signal output.
k REMOTE connector (8-pin)
Connect an external control device, such as the
RM-B150/B750 Remote Control Unit.
l AUX IN (auxiliary input) connector
(BNC type) (when the HKSR-9001 is
installed)
Connect an external device to increase the
number of audio input channels, or to synchronize
this unit to the output of an HD device.
m HD SDI MON2 (HDSDI monitor
output 2) connector (BNC type)
Use in the same way as the HD SDI MON1
connector on the left-side panel (see page 16).

Upper Panel

Control panel
(page 20)
With control panel detached
a Lock release button
When removing the control panel, use this button.
For details, see "Attaching the Control Panel" (page
35).
b Handle
Use to carry the unit.
You can attach an accessory to the seven screw
3 1
holes ( / " × 4, / " × 3) on the top of the handle.
8 4
You can also attach the CAC-12 microphone
holder to the side of the handle.
For details, see "Using a Microphone" (page 32).
c Assistant panel attachment screws
Attach the optional AP-1 Assistant Panel or the
CAC-12 microphone holder.
For details, see "Attaching the AP-1 Assistant Panel
(Optional)" (page 37) or "Using a Microphone"
(page 32).
d Cable holder attachment screws
Attach the supplied cable holder to hold the cable
of the control panel or the optional AP-1 Assistant
Panel.
e Accessory attachment screw holes
You can attach accessories to the two screw holes
3 1
( / " × 1, / " × 1).
8 4
Locations and Functions of Parts 19