Outputting Color Bars - Sony SRW-9000 Operation Manual

Item Setting
PB RIGHT
POSITION
LEFT
BOTTOM
TOP
BOUNDARY With HOR:
0 to 1920
With VERT: 0
to 1080
To display a monitor LUT mark
When a monitor LUT (ITU-R709) is applied to
the SDI output from the HD SDI MON1 and HD
SDI MON2 connectors, or to the video in the
viewfinder, you can display an MLUT mark
(709ϒ) to indicate that the applied gamma is
different from the gamma of the recorded video.
Note
The monitor LUT function is enabled when you are
using S-LOG A.
Set MLUT MARK to ON, then set the brightness
and position of the indication.
Item Function
LEVEL For selecting the brightness of
the monitor LUT mark among 1
to 4 (4 is the maximum
brightness.)
Content
With HOR, the
playback picture is
displayed on the
right and the
camera image on
the left (default
when HOR is
selected).
With HOR, the
playback picture is
displayed on the
Color bar signals can be output from the unit's
left and the
internal color bar generator.
camera image on
Use the <OTHERS 1> page of the Camera
the right.
>USER (MAINTENANCE) menu.
With VERT, the
playback picture is
<OTHERS 1> page
displayed in the
lower part and the
camera image in
the upper part
(default when
VERT is selected).
With VERT, the
playback picture is
displayed in the
upper part and the
camera image in
When CAM BARS is set to ON, the color bar
the lower part.
generator is turned on, and the color bar signal is
The boundary
output.
position can be
For the HD output (to the viewfinder and
changed (default:
monitor) and SD (VBS) output, the format of the
with HOR: 960,
color bar signals can be independently selected.
with VERT: 540).
Regardless of HD output and SD output settings,
the main line output is always a 16:9 (100%)
color bar signal.
HD-BAR (VF/MON)
You can select the formats of the color bar signals
sent to the VF, HD SDI MON1 and HD SDI
MON2 connectors from among 17 types.
SD-BAR
You can select the formats of the color bar signals
to the TEST OUT and REMOTE connectors from
among five types.
Item Function
H POS For setting the horizontal
position of the indication in the
range of 0 to 99 (0 is the
leftmost.)
V POS For setting the vertical position
of the indication in the range of 0
to 99 (0 is the uppermost.)

Outputting Color Bars

Item Selectable color-bar formats
HD-BAR BAR 16:9 (100%), BAR 16:9
(VF/MON) (75%), SMPTE 16:9 (BLACK)
BAR 4:3 (100%), BAR 4:3 (75%),
SMPTE 4:3 (BLACK), MF-ARIB
(75%), MF-ARIB (100%), MF-
ARIB (+I), MF-SMPTE (–I, Q)
Setting the Camera Outputs 59