Detailed Function Settings - Sony SRW-9000 Operation Manual

Detailed Function
Settings
You can use the <SW ASSIGN 1> and <SW
ASSIGN 2> pages of the Camera >USER
(OPERATION) menu to assign functions to the
assignable buttons/switch, in the same way that
you assign functions using the subdisplay. You
can also set the operation mode of the MENU
SEL/ENTER dial.
<SW ASSIGN 1> page
<SW ASSIGN 2> page
Assigning functions to the assignable
buttons/switch
Move the cursor to one of the ASSIGN SW1 to
ASSIGN SW8 lines, or to the ASSIGN SWN or
ASSIGN SWC line, and then press the MENU
SEL/ENTER dial. The settings page for the
corresponding assignable button/switch appears.
Assign functions in the same way that you assign
functions in the subdisplay.
For the assignable functions, see "Assigning
Functions to Assignable Buttons/Switch" (page 51).
68

Detailed Function Settings

Setting page for assignable button 1
The setting pages for buttons 2, 3, 5 to 8, N and C
have the same layout as that for button 1.
Setting page for assignable switch 4
On each page, move the cursor to the function to
be assigned and press the MENU SEL/ENTER
dial.
Setting the operation mode of the MENU
SEL/ENTER dial
You can reverse the operations that occur when
the MENU SEL/ENTER dial is turned in the
clockwise or counterclockwise direction. This
setting applies to the dial on the AP-1 (optional)
as well as to the one on the right-side panel of the
main unit.
Setting Operation
STD (default) Clockwise rotation moves the
cursor down (to the next position)
or increases a setting value.
RVS Clockwise rotation moves the
cursor up (to the previous
position) or decreases a setting
value.