Shutter Settings - Sony SRW-9000 Operation Manual

AP-1 Assistant Panel
CANCEL/STATUS button
VF MENU/
DISPLAY button
LOCK switch
PAGE button
RUN button
a) Turning the dial changes a setting, and pressing it
confirms a setting (ENTER button function).
You can also use the display/menu operations
section of the main unit to operate the subdisplay
of the AP-1, and use the AP-1 to operate the
subdisplay on the right-side panel.
However, the LOCK switches function
independently. When you want to lock the
display/menu operations section or the AP-1, turn
on the LOCK switch on that side.
To display setting pages
After the unit is turned on, the current operation
mode (CINE or CUSTOM) appears on the
subdisplay for several seconds, followed by the
most recently used settings page.
To advance one page
Press the PAGE button.
To go back one page
Press the SET button (press and release the button
within one second).
To change a setting
1
Press and hold the SET button for more
than 1 second.
The unit enters data modification mode, the
cursor ( | ) starts flashing, and a question
mark appears at the rightmost position on the
first line.
42 Basic Settings with the Subdisplay
MENU SEL/
a)
ENTER dial
Press
Turn
SET button
Cursor (flashing)
On a page with two or more setting items,
pressing the SET button moves the cursor to
the next item.
Cursor
2
Move the cursor to the item to be set,
then change the setting by turning the
MENU SEL/ENTER dial.
Note
Camera menu operations on the viewfinder screen
cannot be performed while the subdisplay is in data
modification mode.
To confirm a change
Do one of the following:
• Press the PAGE button.
• Exit data modification mode by pressing the
MENU SEL/ENTER dial (the cursor and
question mark disappear).
• Terminate the subdisplay operation by pressing
the VF MENU/DISPLAY button.
To cancel a change
Press the CANCEL/STATUS button before
confirming the change.
The "?" mark disappears, and the original setting
is restored.
To terminate subdisplay operation
Press the VF MENU/DISPLAY button.

Shutter Settings

The electronic shutter settings of the unit can be
displayed and adjusted as exposure time values,
or as shutter angle values, as with a film camera.
There are two adjustment modes for angles: Step
mode and Continuous mode.
Question mark