Sony SRW-9000 Operation Manual page 137

PAINT menu
Page title & No.
purpose
<SCENE FILE> P15[ - - ]
Storing and
retrieving scene
files (data set by
the PAINT menu)
Noise Suppression
You can enable this function on the <NOISE
SUPPRESS> page of the PAINT menu. It allows
you to effectively suppress noise components
while preserving fine-grained edge components.
The noise suppression function of this unit
employs a system that extracts and suppresses
noise within frames. Compared to inter-frame
methods, it delivers excellent results when
applied to moving subjects.
You can select from among 4 effect levels; LOW
(30%), MID (60%), HIGH (90%), MAX (100%).
LOW: To mainly cut noise components in the
high range
MID: To mainly cut noise components in the
high and middle ranges
Item Default
1
2
3
4
5
01
STORE
STANDARD
READ
t
(MS CAM)
WRITE
t
(CAM MS)
FILE ID
CAM CODE SRW-9000
DATE
HIGH: To mainly cut noise components in the
MAX: To mainly cut noise components in the
The percentage values are approximate
indications of the effect, when the maximum is
100%.
Because this function has some effect on the
frequency components of the video, the edges of
low-luminance blocks may be weakened. A
preliminary test shooting is recommended.
Settings
01 to 32
Execute by ENTER
Execute by ENTER Read the standard paint
Execute by ENTER Load scene files from a
Execute by ENTER Write scene files in
Max.14 characters
Camera code
Date of file creation Display only
high, middle, and low ranges
high, middle, and low ranges
Note
Remarks
When storing a file in
internal memory,
specify the number
before executing
STORE.When reading,
only specify the
number.
Specify the scene file
number 01 to 32 when
32 SCENE FILE of
<OTHERS 2> of the
MAINTENANCE
menu is ON.
data
"Memory Stick" to
internal memory.
internal memory to a
"Memory Stick".
Enter a comment for
the scene files to be
written to a "Memory
Stick".
Display only (when
files made by the unit
are detected, "SRW-
9000" is displayed).
Camera Menu List 137