Reading User Gamma Curves; Reading User Mlut Files; Storing Ohb Files - Sony SRW-9000 Operation Manual

Unit settings change to reflect the settings loaded
from the reference file.

Reading User Gamma Curves

You can read gamma-curve (user gamma) data
that has been created using the CvpFileEditor
application software and saved to a "Memory
Stick". Use the <USER GAMMA> page of the
FILE menu.
Insert the "Memory Stick" into the "Memory
Stick" slot of the unit. Move the cursor to READ
(MS t CAM) in the USER GAMMA section
and press the MENU SEL/ENTER dial.

Reading User MLUT Files

You can read MLUT-curve (user gamma) data
that has been created using the CvpFileEditor
application software and saved to a "Memory
Stick". Use the <USER GAMMA> page of the
FILE menu.
Insert the "Memory Stick" into the "Memory
Stick" slot of the unit. Move the cursor to READ
(MS t CAM) in the MLUT section and press the
MENU SEL/ENTER dial.

Storing OHB Files

Use the <OHB FILE> page of the FILE menu.
178 File Operations
1
Execute STANDARD on the
<REFERENCE> page of the FILE
menu.
2
Use the MAINTENANCE menu to set
the items marked with "√" in the "O"
column of the table in "List of Items
Stored in Files" (page 172) to the state
that you want to store.
3
Display the <OHB FILE> page of the
FILE menu, move the cursor to STORE
FILE, and then press the MENU SEL/
ENTER dial.
Adjusting ND offset values
The white balance may shift slightly when the ND
filters are used. In this case, adjust the ND offset
values.
The ND offsets hold white balance compensation
values for each filter, using the white balance
when the ND:1 and CC:A filters are selected as a
reference.
1
Switch the camera to Custom mode,
referring to "Switching between the
Basic Operation Modes" (page 40).
2
Execute STANDARD on the
<REFERENCE> page of the FILE
menu.
3
Execute AUTO BLACK on the <AUTO
SETUP> page of the MAINTENANCE
menu.
4
Connect a waveform monitor to the HD
SDI MON1 connector or HD SDI
MON2 connector of the unit.
5
Select ND:4 and CC:E and shoot a gray-
scale chart.