Setting The Gain; Detailed Shutter Settings - Sony SRW-9000 Operation Manual
Hd camcorder
Hide thumbs
Also See for SRW-9000:
- Operation manual (221 pages) ,
- Brochure & specs (8 pages) ,
- Operation manual (205 pages)
Table of Contents
Advertisement
Setting the Gain
If the gain of the video amplifier of the unit is to
be switched using the gain switch of the RM-
B150 Remote Control Unit, the gain values for
the corresponding switch positions must be
specified in advance.
Use the <GAIN ASSIGN> page of the Camera
>USER (OPERATION) menu.
<GAIN ASSIGN> page
Menu item
Setting
GAIN [L]
Gain value corresponding to the L
position of the gain switch
GAIN [M]
Gain value corresponding to the M
position of the gain switch
GAIN [H]
Gain value corresponding to the H
position of the gain switch
SHOCKLE SS
Shockless gain on or off
GAIN
Any of –6, –3, 0, 3, 6, 9, or 12 dB can be set for
each of the L, M, and H positions, in any
sequence.
Detailed Shutter
Settings
When you turn this unit’s Electronic Shutter
function on, you can control the shutter by
selecting either shutter angles or shutter speeds
(seconds).
You can use the subdisplay for normal shutter
switching, and make more detailed settings on the
<SHUTTER> page of the Camera >USER
(PAINT) menu. The menu allows you to set the
shutter on a page that displays the shutter angle
(degrees), the shutter speed (seconds), and the
shutter mode.
<SHUTTER> page
SHUTTER
To activate the electronic shutter, set this to ON.
The [deg] field displays the currently selected
shutter angle, and the [sec] field displays the
speed (in seconds), converted according to the
current frame rate.
STEP (Step mode)
To select a step shutter value, move the cursor to
this line.
Turn the MENU SEL/ENTER dial to display
registered shutter values in the [deg] and in [sec]
fields.
CONTINUOUS (Continuous mode)
To fine-adjust the selected shutter step value or
use a value that has not been registered as a
shutter step value, move the cursor to this line.
The values in the [deg] and [sec] columns change
continuously when the MENU SEL/ENTER dial
is turned.
STEP ASSIGN
You can add and delete shutter step values in the
same way as with the <SHUTTER ASSIGN>
Page 69
Advertisement
Table of Contents
