Using The Select Fps Function - Sony SRW-9000 Operation Manual

Format: S59P (23PsF) SELECT FPS = ON
Number of frames shot: 50 FPS
Shooting at 50 FPS
Data transfer at 60P
Record only effective frames onto tape (record with continuous 24F timecode).
Converted to 23.98PsF when SELECT FPS is set to "OFF"
Playback: 23.98PsF
Playback at 23.98PsF

Using the Select FPS Function

1
Make system settings.
Select the target frame frequency (24, 25, or
30PsF), and select the recording format
(4:2:2, 4:4:4 SQ, 4:4:4 HQ, or 4:4:4 HQ
12bit).
On formats available for Select FPS shooting,
see page 106.
Example settings: Settings for 24 frames of
target frame frequency (23.98PsF) and
4:4:4 SQ recording format.
1 Carry out step 1 of "To set with
FORMAT" (page 76) in "Selecting the
System Signal Format".
104 Select FPS Function
Store only effective frames in memory.
Smooth slow motion playback at 0.48 times
normal playback speed
NV: Ineffective frame
HKSR-9002
2 Set as shown below.
3 In the submenu window, select [SET].
The format is switched, and "S59P(23PsF)"
appears in the display (for about 30 seconds).