Right Side - Sony SRW-9000 Operation Manual

Right Side

Display/menu operations section (page 18).
a Assignable buttons 5 to 8
You can assign frequently used functions to these
buttons by menu settings. The following
functions are assigned when the unit is shipped
from the factory.
Switches Functions
5 STOP
6 PLAY
7 REW
8 F.FWD
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 51).
b Filter label and assignable buttons N
and C
The filter label show the filters selected by the
knobs of the front panel filter selector. You can
use the Camera menu to assign functions to
assignable buttons N and C. They are set to OFF
(disabled) when the unit is shipped from the
factory.
When the optional HKSR-9004 is installed, the
default values of the assignable buttons N and C
are ND and CC respectively.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 51).
c LOCK switch
When slid to the right, locks the operation buttons
on the right-side panel.
If you wish, you can set this switch so that it locks
all buttons except the RUN button. Make this
setting on the <SUBDISPLAY 2> page (see page
111) of the Camera >USER (OPERATION)
menu.
d Assignable 4/AUTO BLK BAL (auto
black balance) switch
Push the switch downward to the AUTO BLK
BAL side to start the auto black balance
adjustment.
You can use the Camera menu to assign a
function to the 4 position (upper position). This
position is set to OFF (disabled) when the unit is
shipped from the factory.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 51).
e RUN button and indicator
Starts and stops recording. The indicator lights
during recording, and flashes when low voltage or
an error is detected.
For more information about the indicator operation,
see "Warning/Error Messages" (page 185).
f "Memory Stick" slot
Allows you to insert a "Memory Stick".
The access lamp lights in red while the unit is
writing or reading data to/from a "Memory
Stick". You can use "Memory Stick PRO" or
"Memory Stick PRO Duo" media with this unit.
("Memory Stick PRO Duo" media can be used
without any adaptor.)
Note
When the access lamp is lit in red, do not insert/remove
the "Memory Stick" or turn off the unit.
See "File Configuration" (page 170) for information
about data files that can be handled with "Memory
Stick" media.
For details on "Memory Stick" media, see "Using a
"Memory Stick"" (page 174).
g Tripod screw holes
3
Two screw holes (for / -inch camera screws) are
8
provided on the bottom-side panel.
Locations and Functions of Parts 17