Table of Contents
Advertisement
Activating/deactivating remote access
To enable you to administer the BizIP AD 20 outside your LAN, you can ac-
tivate corresponding access. To protect access from the Internet, an IP ad-
dress and/or subnet mask must always be specified.
Please note that by activating remote service access you will in-
crease the risk of misuse by unauthorized persons.
Only activate this type of access if you really need it, and deactivate
it immediately after use.
Configuring the dynamic DNS service makes remote administration
easier
Page 111.
Administration on the PC
Web > Connectivity Settings > Service> Administration
Activating remote administration
1. Under Administration, select the Enabled option to enable adminis-
tration from outside the LAN by means of a Web interface.
2. Enter the Remote host IP and/or Remote netmask (address band) of
the external PC from which access is to be made.
If you want to enable remote access from any IP address, then enter
0.0.0.0 as the IP address and subnet mask.
Click Apply to apply your changes.
Security for your HiPath BizIP
69
Advertisement
Table of Contents
