Table of Contents
Advertisement
Replacing a telephone
To ensure that the telephone configuration can be transferred to the
replacement device without any problems, only telephones of the
same type should be used as replacements.
Administration on the PC
Web > System-wide Settings > Device Management
For information on changing the phone number manually, see
Page 104 and for information on the installation lock for other
BizIP 410 telephones, see
Replacing a telephone
1. Select the telephone to be replaced from the list.
2. Click Replace Device.
3. Confirm the warning message indicating that the telephone is in the
online status. The message Phone save to disconnect appears in the
telephone display.
4. Disconnect the power supply and LAN cables on the telephone to be
replaced.
5. Connect the replacement telephone
6. Click Refresh Device List to display the current data.
The properties of the previous telephone are automatically transferred to
the replacement telephone.
Administration scenarios
Page 71.
Page 12.
103
Advertisement
Table of Contents
