Table of Contents
Advertisement
HiPath BizIP Overview
Your HiPath BizIP is a pioneering communication platform based on forward-looking tech-
nology. The use of peer-to-peer technology in the LAN means that adding more telephones
to the system could not be easier.
You will find details of the various devices beginning on
Network access for data and voice signals is provided via an access device (gateway). The
system can be used both for Internet telephony (VoIP) and ISDN.
Each system telephone has a personal answer machine. In addition, two analog tele-
phones are also supported (for example, fax).
This manual is intended both for the service engineer who is installing and configuring the
system, and the customer's service personnel if the latter is responsible for installing and
administering the system.
Since the HiPath BizIP firmware is continuously being improved, we recommended
that you update the BizIP 410 e 410 telephone firmware before initial use
All trademarks used are the property of Siemens AG or their respective owners.
Important information
Only use the power supply specified for the access device or telephones.
Do not install the access device or telephones in bathrooms or shower
rooms. The access device and telephones are not splash-proof.
Do not operate the telephone in environments where there is a danger of ex-
plosion.
Never open the telephones or a key module! In the event of problems, con-
sult your service personnel or specialist dealer.
Use only original Siemens accessories!
The use of other accessories is dangerous and will invalidate the warranty
and the CE mark.
HiPath BizIP Overview
Page 10.
Page 24.
7
Advertisement
Table of Contents
