Table of Contents
Advertisement
Administering allowed/restricted phone numbers
To be able to make full use of the restriction of specific telephones when
dialing numbers
phone numbers.
Configuration is performed by means of two lists:
•
The list of restricted numbers is a negative list. This means that
only the numbers entered are restricted.
•
The list of allowed numbers is a positive list. This means that
only the numbers entered here are allowed. This means that the
use of the positive list is usually much more restrictive.
Administration on the PC
Web > System-wide Settings > Restricted and allowed numbers
Adding allowed/restricted numbers
1. Enter the number to be added to the list as the Number for
Restricted Numbers or Allowed Numbers.
This can be a complete phone number (e.g. 089123456) or the first part
of a phone number (e.g. a local area code: 089), in each case without
TAC.
2. Click Add Entry to add the number to the list.
3. Repeat Step 1 and 2 as necessary to add additional numbers.
Up to 50 numbers can be added to each list.
Page 65, you can create lists of allowed and restricted
Security for your HiPath BizIP
67
Advertisement
Table of Contents
