Table of Contents
Advertisement
Adjusting the audio settings
There are different acoustic signals that you can configure on the BizIP 410
telephone, such as handset volume or ringer melody.
This function is also available in the user area. For a detailed descrip-
tion, see the Operating Manual.
Administration on the PC
Web > Phone Settings > Audio Settings
Adjusting the settings
•
From the Handset Volume list, select the required handset volume: 1
(quiet) to 8 (loud), default: 4.
•
From the Loudspeaker Volume list select the required volume for the
telephone speaker (e. g. for open listening): 1 (quiet) to 8 (loud), de-
fault: 2.
•
From the Ringer Volume list select the required volume of the ringer
for incoming calls: 1 (quiet) to 5 (loud), default: 2.
•
From the Key Click Volume list select the required volume of the click
when a key is pressed on the telephone: 0 (no key click) to 3 (loud), de-
fault: 0.
•
From the Ringer Melody list select the required melody of the ringer
for incoming calls: 1 to 8, default: 2.
•
From the Ringer Tone Sequence list select the required cadence of
the ringer for incoming calls: 1 to 3, default: 3.
Click Submit to apply your changes.
Configuring HiPath BizIP properties
81
Advertisement
Table of Contents
