Making Calls; Activating/Deactivating Handsfree Talking; Saving Numbers - Siemens Euroset 5020 Quick Manual

Making calls

Dialling a number
co
Lift handset, dial number.
or ...
o Bc
Dial number (you can delete wrongly entered
A
digits with
digit) and press the OK key.
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.
Any digits after the 20th digit are moved from right to left in
the display. The Last number redial key
insert pauses when dialling, starting from the 2nd digit.
Select phone number from the calls list (if available):
see 7.

Activating/deactivating handsfree talking

With this telephone you can also make calls (handsfree
mode) or settings without lifting the handset. The best
distance from the microhone for speaking is about 50 cm.
◆
Activating during a call via the handset
L a
+ With the Loudspeaker key pressed replace the
handset.
◆
Activating before dialling the number
L
Before dialling: hold down the Loudspeaker
key until you can hear the dialling tone.
Deactivating handsfree talking
c
Lift the handset during the call.
Last number redial
The last 5 numbers dialled (up to 32 digits) are saved
automatically. You can retrieve these numbers from the last
number redial list and dial them again:
Redialling the last number dialled
c; Lift the handset and press the last number
redial key. The last number dialled is redialled
immediately.
Dialling from the last number redial list
;
Without lifting the handset: Press the last
number redial key.
The last number dialled is displayed. (You can
leave the last number redial list at any time by
pressing >
and then enter the correct
;
can be used to
.)
3
GB
A C
... Using the Down/Up key, scroll through the list
to the desired number.
B
Press OK or
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.
Dialling using the repertory keys
c
Lift handset. (If necessary, press
level repertory key).
:
Press repertory key.
or ...
:
Press repertory key. (If necessary, press
a 2nd level repertory key).
Bc Press OK or
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.

Saving numbers

Different telephone settings must be completed with the
?
Set key so that they are available permanently.
In order to cancel without saving, e. g. after an incorrect
entry, replace the handset instead of pressing
end. The original setting is then retained.
Saving repertory numbers
You can save up to 20 phone numbers (or even functions,
see page 8) on both levels of the repertory keys.
?
Press the Set key. (For 2nd memory level, also
=
press
:
Press the repertory key under which you want
to save the repertory number.
A number that has already been saved is
shown in the display. If the memory for this
repertory key is empty, z appears in the display
o Enter the number to be saved (up to 32 digits).
or ...
Saving from the calls list (if service is available)
A C
... Press the Down/Up key until the desired
number appears in the display.
or ...
Saving from the redial list:
;
Press the last number redial key.
L
key.
=
L key.
?
.)
for a 2nd
=
for
at the