Siemens HiPath BizIP AD 20 Administration Manual page 108

Hipath bizip access device/ telephones
Table of Contents

Advertisement

Administration scenarios
Recording of calls (on / off)
If recording is switched off for a mailbox, the answer machine can once
again pick up the call at the end of the auto answer time. The selected
greeting is played back, followed by a message indicating that message re-
cording is not possible.
Time until auto answer
You can set an auto answer time of between 0 and 59 seconds. During this
time the telephone rings and the mailbox for the station is then activated.
The time set should be greater than 3 seconds. In the case of times that
lie below this limit, the mailbox may pick up calls immediately without a
call being signaled.
Message length
The maximum length of a message can be restricted on the basis of the
maximum recording duration of 10 minutes. A time of between 1 and 5
minutes can be set here. A length of 2 minutes is set by default.
Redirection to intercept position
If the user presses the
the mailbox attempts to call the intercept position.
The intercept position is either the first telephone in the HiPath BizIP or has
been set up with Web > Connectivity Settings > Telephony
> Miscellaneous.
108
e
key during the greeting or message recording,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath bizip 410

Table of Contents