Getting started
6. In Step 2 you must first define the basic data for your ISDN connec-
20
If applicable, you will find this data in your configuration table
Page 13.
Click Next >.
Once a connection has been established with the DSL access provider,
the "WAN" LED lights up
LED indicators, see
tion:
– Under ISDN Operating Mode, select the option
Point-to-Multipoint (multi-device connection).
– Under Country Code, select the option Deutschland (+49).
– Under Area Code, enter the telephone prefix for your location with
the leading zero, such as "089" for Munich for example.
Now, assign ISDN phone numbers to the telephones:
In the MSN X fields, enter the MSNs assigned to you by the network
operator. This is the receiving MSN for your connection.
From each of the lists in the Outgoing No. column, select one MSN
for outgoing calls (sending MSN).
Now assign one device to each receiving MSN by checking the relevant
checkboxes. When you activate multiple checkboxes for a single re-
ceiving MSN, multiple devices will ring when called on this phone num-
ber.
In the example, the telephones with the internal phone numbers 21
and 22 will ring when you dial the phone number +49 (89) 78107467 .
Page 10. For further information on the
Page 132.