Table of Contents
Advertisement
Administration scenarios
Optimizing your HiPath BizIP with Quality of Service
By changing the "Quality of Service" values (
whether your HiPath BizIP is to use "Quality of Service".
Administration on the PC
Web > Connectivity Settings > IP Routing > Quality of Service (QoS)
Activating/deactivating QoS
•
•
Administration on the BizIP 410 telephone
Menu access
Entries:
QoS on/off
Virtual LAN ID
Virtual LAN Discovery
112
Your HiPath BizIP is pre-configured for the default application. You
should only make changes to the QoS values if problems occur with
the values described above, the LAN switch supports QoS, and you
have experience in QoS administration.
Select ein or aus to enable or disable "Quality of Service".
Click Anwenden to apply your changes.
> k j
(password)
f e
(L2 off, L3 off) or
f f
(L2 off, L3 on) or
f g
(L2 on, L3 on)
l
:
(VLAN ID)
m
e
(
for manual or
QoS) you can specify
: e d j
f
for DHCP)
Advertisement
Table of Contents
