Table of Contents
Advertisement
HiPath BizIP update
Performing an upgrade
1. Load the firmware file to the hard drive of a PC in the HiPath BizIP LAN.
2. Enter the path to the firmware file under Locate New Firmware or se-
lect this with Browse....
3. Click Upgrade to start the upgrade.
The upgrade can take a few minutes. After the upgrade the BizIP AD 20 is
restarted.
The first time you access the Web interface
Page 28 after the Web up-
date, a message appears referring to the update that has been performed.
89
Advertisement
Table of Contents
