Administration on the BizIP AD 20
Performing a restart directly on the BizIP AD 20 can lead to a loss of
data in the HiPath BizIP.
There is a recessed reset switch (circled in red) on the rear of the
BizIP AD 20.
Press the switch briefly (max. 2 seconds). Use an object such as an unbent
paper clip, for example, to press the switch.
Alternative option:
You can also restart the BizIP AD 20 by removing the round power plug
(blue circle) on the BizIP AD 20 for a few seconds and then reinserting it.
Administration scenarios
125