Administration on the PC
Web > Connectivity Settings > LAN > DHCP Service
Changing the DHCP configuration
The following is a description of how to configure the integrated DHCP ser-
vice.
•
You can adapt the IP address area to your requirements by changing
the entries in the Start IP Address and End IP Address fields (default:
192.168.1.2 to 192.168.1.254). The values must correspond to the
BizIP AD 20 IP data
•
After the time specified under Leased Time has expired, the list of all
IP devices in the network is updated, which can lead to a change of IP
address for individual devices.
Network conflicts can occur if the DHCP function of DHCP cli-
ents is changed during this time.
Page 47.
Configuring a LAN
49