Table of Contents
Advertisement
Configuring connection data
Configuring connection data
Adapt the configuration of the
HiPath BizIP to your requirements.
Administering ISDN phone numbers
Configure the ISDN phone numbers required for the telephones and as-
sign individual telephones to different call groups.
For information on administering Internet telephony phone numbers, see
Page 42.
Data required
Different data is required depending on the connection type (ISDN Oper-
ating Mode). Information on the connection type is available from your
telephone provider.
•
•
•
•
If applicable, refer to your phone number entries on
Administration on the PC
Web > Connectivity Settings > Telephony > ISDN
32
When several telephones are connected (Point-to-Multipoint):
– MSNs (generally a maximum of 10 per connection)
For system connection (Point-to-Point):
– System number
– Phone number block (DDI numbers 0-n to 0000-nnnn)
Country code
Area code
ISDN and
IP access data in the
Page 13.
Advertisement
Table of Contents
