Table of Contents
Advertisement
Installation
Wall-mounted installation of the access device BizIP AD 20
Wall brackets are supplied for mounting the telephone on the wall.
When installing the device, please note the following points:
•
Choose an installation site that can easily be reached with all cables required
(for example, to the NTBA).
•
Watch out for power cables in the wall when deciding where to drill the holes. Use the
bracket as a template to mark the drill holes.
•
Attach all cables provided to the BizIP AD 20
bracket BizIP AD 20.
•
Make sure that the cables are not twisted or pinched when mounting the BizIP AD 20
on the bracket.
Optional wall brackets are also available for the BizIP 410 a and BizIP 410 e telephones
(part no.: L30250-F600-A157).
BizIP AD 20 access device as a desktop device
You should attach the wall bracket even if you are going to use your BizIP AD 20 as a desk-
top device in order to make it more secure.
HiPath BizIP Overview
Page 15 before mounting it on the
9
Advertisement
Table of Contents
