Table of Contents
Advertisement
Administering your HiPath BizIP
You can adjust the HiPath BizIP to your personal requirements. The
HiPath BizIP administration required for this purpose is easily performed
using a PC with a graphical user interface.
Prerequisites:
•
Your HiPath BizIP devices have already been installed
•
The PC used for administration is connected to the HiPath BizIP LAN.
Follow the steps below to administer a HiPath BizIP device (for
example the BizIP AD 20 or a BizIP 410 telephone):
1. Open Microsoft Internet Explorer on your PC. As shown in the over-
view on
Page 16, the PC must be connected to the BizIP AD 20.
2. Enter the IP address of the BizIP AD 20:
be changed, see
3. The BizIP AD 20 login window appears.
Throughout this document, the term Web at the beginning of
the menu path will indicate the opening of this interface
(for example, see
Enter the administration password under Password (default: 123456,
and click Login.
Page 47).
Page 32).
Administering your HiPath BizIP
Page 14.
http://192.168.1.1/
(default, can
27
Advertisement
Table of Contents
