Siemens Gigaset AL145 Instructions Manual

Gigaset AL140/AL145
The handset at a glance
1 Charge status of the bat-
teries
2 Answer machine icon
(AL145 only)
3 Display keys
4 Message key
u
5 Control key ( )
6 Talk key
7 Directory key
(press down on
the control key)
8 End call key and
On/Off key
9 Ringer tone on/off (press
and hold in idle status)
10 Keypad lock on/off
(press and hold)
11 Recall key
- Consultation call
(flash)
- Dialling pause
(press and hold)
12 Microphone
13 "Microphone off" key
The base station at a
glance
Registration/paging key:
¢
Search for handsets (press
briefly, "Paging" p. 10)
¢
Register handsets (press and
hold p. 10).
1
±
2
11.12. 11:56
INT MENU
3
4
5
6
7
8
9
10
11
12
13
ECO DECT
You are helping to protect the environment with your Gigaset AL140/
AL145.
Reduced energy consumption
Your telephone has an energy-saving adapter plug and uses less energy.
Reduced transmission power
The transmission power of your telephone is reduced automatically:
The handset's transmission power is reduced depending on the distance to
the base station. The transmission power on the base station is reduced to
virtually zero when only one handset is registered and the handset is in the
base station.
You can reduce the transmission power of the handset and base station
even more by using Eco Mode/Eco Mode+ (see Menu tree
◆
Eco Mode: 80% transmission power reduction in standby mode and dur-
ing a call (the range of the base station is reduced).
◆
Eco Mode+: 100% transmission power deactivation in standby mode
(top left display icon
base station can be reached. You will hear the ringing tone if the base
station can be reached.
Gigaset helpdesk: 0845 3670812 (for further details
1
New messages in the calls list/
answer machine (network mail-
box) list (
a flashing display.
V
Display keys:
Pressing a key launches the function
that appears above that key in the dis-
play.
Display
INT
MENU
"
U
T
˜
OK
½
). Press and hold the talk key
Note
¢
p. 8) are indicated by
Function when pressed
¢
Call other registered
handsets p. 10.
Open main/submenu
¢
(see Menu tree
p. 14).
Go back one menu level.
Scroll up/down or adjust
volume with u.
Move cursor to left/right
with u.
Backspace deletes one
character at a time.
Confirm menu function
or save entry.
¢
p. 15):
c
to check that the
¢
p. 12)