Table of Contents
Advertisement
Configuring dynamic IP routes
It only makes sense to use
junction with other routers that support dynamic routing.
RIP does not need to be configured in any other case.
Data required
•
RIP version
•
Support, depending on interface and mode
Administration on the PC
Web > Connectivity Settings > IP Routing > Dynamic Routing
Configuring dynamic routing
•
Activating/deactivating dynamic routing. The Enabled option activates
the following settings.
•
Select the supported version of the routing information protocol under
RIP Version.
•
Select the mode for which dynamic routing is to apply under LAN and
Public-Network (the definable connection name is displayed as the
name):
– None (RIP data is neither sent nor received).
– Inbound (RIP data is received but not sent).
– Outbound (RIP data is sent but not received).
– All (RIP data is sent and received).
Click Apply to apply the changes.
RIP if HiPath BizIP is operated in con-
Configuring a LAN
55
Advertisement
Table of Contents
