Power Button - Compaq Deskpro 4000N Maintenance & Service Manual

5.16.2 Power Button

It is not necessary to remove the front bezel from the system unit cover to remove the power button.
To remove the power button, complete the following steps:
1. Prepare the computer for disassembly (Section 5.4).
2. Remove the system unit cover (Section 5.7).
3. Lay the system unit cover assembly top down on a protected work surface. Pinch together the
two tabs on the rear of the power button and push the button out of the front bezel. The spring
will follow the button out of the housing.
Figure 5-20. Removing the Power Button (Deskpro 4000S Shown)
To replace the power button, reverse the above procedure.
Compaq Deskpro 4000S and 4000N Personal Computers 5-29