Cable Lock Provision - Compaq SP700 Reference Manual

Cable Lock Provision

The cable lock provision consists of a two-piece security bracket. The bottom
part of the bracket is attached to the workstation with a screw; the top part of
the bracket covers the screw and prevents its removal.
NOTE: The security bracket can be used with a padlock to inhibit access to
the interior of the workstation, which prevents unwanted configuration
changes or component removal. For increased security, a cable lock can be
installed to secure the workstation to a fixed object.
To install the security bracket:
1. Separate bracket A and bracket B by bending the metal back and forth
where the two pieces join.
Figure 3-2.
2. Insert the tab on bracket A into the notch on the rear of the workstation
until the bracket is positioned flat against the side access panel.
3. Align the hole on the flat portion of bracket A with the screw hole on
the side access panel.
B
Separating the security brackets
A
Compaq Professional Workstation SP700 Reference Guide
3-17