N-Storm Settings Window - Nikon N-STORM Operation Manual

3.2

N-STORM Settings Window

4
No. Name
1 [Activation Cycle]
2 [Reporter Cycle]
3 [Continuous Mode]
4 [Conjugated Fluorescence
Probe] area
5 [Activation Probe Name]/
[Reporter Probe Name]
6 Laser wavelength
7 [Channel Color]
(channel display color)
Chapter 3
The Screens of the N-STORM Software
1
2
Specifies the number of activation frames for each cycle. (This
cannot be specified if continuous mode is used to acquire
images.)
Specifies the number of imaging frames (frames that capture
the light emission of the reporter) for each cycle. (This cannot
be specified if continuous mode is used to acquire images.)
Selected when continuous mode is used.
Specifies the following: the fluorescent probe to be used, the
wavelength of the laser to be used, and the display color.
Specifies the names of the activation and reporter fluorescent
probes for each channel.
Selects the excitation wavelength to be used.
Specifies the color to be used for display.
3
5 6
Description
36
7