Table of Contents
Advertisement
82. For details on Special Data Input Commands, see Page 30.
NOTE: You will find the HELP command a useful tool for inquiring about the various commands available.
The following rules apply when entering commands from a terminal keyboard:
•
The commands are not case sensitive (
e.g.
e.g.
•
All commands and required entries can be separated by a space or a comma
(command,variable
e.g.
e.g.
e.g.
e.g.
e.g.
e.g.
e.g.
e.g.
•
At the end of a command or command string issue a carriage return command which is
usually the same as pressing the <ENTER> key.
•
Most command entries do not provide a response to the entered command. Exceptions to
this statement are the VERSION and HELP commands. Otherwise, successful entry of a
command is verified by receipt of the COM port prompt (i.e. COM1> or COM2>).
The syntax for a command can contain optional parameters (OPT1, OPT2, ...). OPT2 may only be used if it is
preceded by OPT1. OPT3 may only be used if it is preceded by OPT2 and so on. Parameters after and including
OPT1 will be surrounded by square brackets.
An optional parameter such as {hold} may be used with the log without any preceding optional parameters
Example:
log com1 posa 60 1 hold
log com1 posa hold
When the MiLLennium-GLONASS GPSCard is first powered up, or after a FRESET command, all commands will
revert to the factory default settings. The SAVECONFIG command can be used to modify the power-on defaults.
Use the RCCA log to reference station command and log settings.
NOTE:
In a FRESET or a software load, all previously stored configurations that were saved to non-volatile
memory are erased (including Saved Config, Saved Almanac, and Channel Config).
NOTE:
Please refer to the MiLLennium Command Descriptions Manual for a table of Commands By Function
and an alphabetical listing of commands. Please see Appendix G, Page 82 for a detailed description of
GLONASS specific commands.
GPS/GLONASS Receiver User Manual Rev 1
COMMAND
or help
HELP
or fix position
FIX POSITION
command variable).
OR
datum,tokyo
datum tokyo
fix,position,51.3455323,-117.289534,1002
fix position 51.3455323 -117.289534 1002
com1,9600,n,8,1,n,off
com1 9600 n 8 1 n off
log,com1,posa,onchanged
log com1 posa unchanged
or command).
4 Operation
29
Advertisement
Table of Contents
