Table of Contents
Advertisement
E.2 SPECIFICATIONS
Only those specifications which differ from the MiLLennium-GLONASS GPSCard (see Table B.1, Page 49) will
be shown in Table E.1.
Size:
Weight:
Operating Temperature
Storage Temperature
Resistance Characteristics
Humidity
Voltage
Power
Connectors on ProPak II enclosure
RF Input
Power Output to LNA
The MiLLennium-GLONASS GPSCard will acquire and track satellites while undergoing vibration levels as shown below. This
assumes that it is mounted using full-length clamped rail mounts and that no vibrating object is touching it. It also assumes that
C/N o > 45 dB-Hz and that the MiLLennium-GLONASS GPSCard is in high-dynamics mode.
Frequency
< 10 Hz
Magnitude (g 2 /Hz)
+ 80 dB/decade
Typical Mounting Configuration - Mount the MiLLennium-GLONASS GPSCard securely using screws driven through the
card's four corner mounting holes.
Superior Mounting Configuration - Mount the card using full length clamped rail mounts.
Note: The card is sensitive to anything that rattles against it.
ProPak II enclosure side view, front end-cap view and rear end-cap view respectively:
GPS/GLONASS Receiver User Manual Rev 1
Table E.1 ProPak II Enclosure Specifications
PHYSICAL
251 mm x 130 mm x 62 mm
1.3 kg
ENVIRONMENTAL
-40°C to +55°C
-45°C to +85°C
Dust tight, water tight
5% to 95% RH (non-condensing) at +40°C
POWER REQUIREMENTS
+10 to +36 V DC
12 W (typical)
RF INPUT / LNA POWER OUTPUT
One TNC female connector
GPS: 1575.42 MHz
GLONASS: 1602 - 1615.5 MHz
4.25 - 5.25 V DC @ 0 - 90 mA (current limit: 200 ± 20 mA).
VIBRATION (Random Profile)
10 Hz
0.00125
PHOTOGRAPHS
40 Hz
1000 Hz
2000 Hz
0.02
0.02
0.005
E ProPak II Enclosure
>2000 Hz
-80 dB/decade
61
Advertisement
Table of Contents
