Table of Contents
Advertisement
3
INSTALLATION
3 Installation
3.1 SYSTEM CONFIGURATION
The MiLLennium-GLONASS GPSCard receiver is an OEM product designed for flexibility of integration and
configuration. You are free to select an appropriate data and signal interface, power supply system, and mounting
structure. This concept allows OEM purchasers to custom-design their own applications around the MiLLennium-
GLONASS.
It also comes in a ProPak II enclosure or PowerPak II enclosure, please see ProPak II Enclosure (Page 59) or
PowerPak II Enclosure (Page 73).
This section provides the necessary information for you to install and begin to use the MiLLennium-GLONASS
GPSCard. A typical system configuration is shown in Figure 3.1.
13
Reference
Description
1
ProPak II enclosure, PowerPak II enclosure
or user-supplied enclosure
2
RF signal & LNA power SMB connector P101
(male, right angle) to antenna via
interconnecting coaxial cable
3
Optional external reference clock input SMB
connector P301 (male, straight)
4
Power, data & signals connector, P1 (male,
64-pin, 0.1", DIN 41612, Type B, right angle)
5
Status LEDs (green & red)
6
LNA power jumper P301,
Power section, Page 21
7
+5 VDC primary power
GPS/GLONASS Receiver User Manual Rev 1
Figure 3.1 Typical System Configuration
1
6
2
see
the External
3
4
7
8
9
10
11
12
5
14
Reference
8
9
10
11
12
13
14
3 Installation
Description
Optional LNA DC power (1 pin)
COM1 (8 pins)
COM2 (8 pins)
Input & output timing strobes
(12 pins)
Matching user-supplied
interface i.e. matches item #4
Optional choke ring ground plane
Antenna model 504 shown
with 5/8" adapter or any NovAtel
L1 GPS/GLONASS antenna
17
Advertisement
Table of Contents
