Table of Contents
Advertisement
F.2 SPECIFICATIONS
Only those specifications which differ from the MiLLennium-GLONASS GPSCard, see Table B.1, Page 49, will
be shown in Table F.1.
Power
External Oscillator Input
COM1, COM2
Strobes
Size:
Weight:
Operating Temperature
Storage Temperature
Altitude
Humidity
Connector
RF Input
Power Output to LNA
The MiLLennium-GLONASS GPSCard will acquire and track satellites while undergoing vibration levels as shown below. This
assumes that it is mounted using full-length clamped rail mounts and that no vibrating object is touching it. It also assumes that
C/N o > 45 dB-Hz and that the MiLLennium-GLONASS GPSCard is in high-dynamics mode.
Frequency
< 10 Hz
Magnitude (g 2 /Hz)
+ 80 dB/decade
Typical Mounting Configuration - Mount the MiLLennium-GLONASS GPSCard securely using screws driven through the
card's four corner mounting holes.
Superior Mounting Configuration - Mount the card using full length clamped rail mounts.
Note: The card is sensitive to any external rattling that occurs next to the card.
PowerPak II enclosure perspective view and rear end-cap view respectively:
GPS/GLONASS Receiver User Manual Rev 1
Table F.1 PowerPak II Enclosure Specifications
INPUT/OUTPUT CONNECTORS
2.1 mm plug, centre positive (+10 to +36 V DC), with screw-on retaining nut
SMB male jack
Frequency: 5MHz or 10 MHz CW
Input Impedance: 50
Input VSWR: 2.0:1
Signal Level: 0.0 dBm minimum, 13.0 dBm maximum
Freq. stability:
DE9P connector
DE9S connector
PHYSICAL
210 mm x 111 mm x 47mm
980 g (Including MiLLennium-GLONASS GPSCard)
ENVIRONMENTAL
-40°C to +60°C
-40°C to +85°C
Not to exceed 5000 meters above sea-level
Not to exceed 90% non-condensing
RF INPUT / LNA POWER OUTPUT
TNC connector
GPS: 1575.42 MHz
GLONASS: 1602 - 1615.5 MHz
4.25 - 5.25 V DC, 90mA max
VIBRATION (Random Profile)
10 Hz
0.00125
PHOTOGRAPHS
Ω
nominal
±
0.5 ppm maximum
40 Hz
1000 Hz
2000 Hz
0.02
0.02
0.005
F PowerPak II Enclosure
>2000 Hz
-80 dB/decade
75
Advertisement
Table of Contents
