Table of Contents
Advertisement
F
POWERPAK II ENCLOSURE
F PowerPak II Enclosure
F.1 POWERPAK II ENCLOSURE
The PowerPak II mounting enclosure provides a protective environment for the MiLLennium-GLONASS
GPSCard. The mounting enclosure houses the internal power card, interconnect back plane, and front panel
connections for COM1, COM2, strobes, GPS/GLONASS antenna, external oscillator, and power input.
NOTE:
The PowerPak II enclosure is intended for stationary operation in benign surroundings such as those
found in a laboratory or on a test bench; it is not designed for environments with feature vibration, dust,
moisture or extremes of temperature.
The PowerPak II enclosure, see Figure F.1, is intended to be used with the following NovAtel accessories and
options:
•
A NovAtel Model 504 or Model 514 L1 GPS/GLONASS antenna - single frequency
•
Model C005, C015, or C030 (5, 15 or 30 m lengths) coaxial cable - to connect the GPS/
GLONASS antenna to the PowerPak II enclosure
•
Cigarette lighter adaptor
•
Optional AC/DC power converter and power cables.
•
Y-type null-modem data cable
•
External oscillator cable (user-supplied)
After the addition of these accessories together with user-supplied data communications equipment and a power
supply, the PowerPak II enclosure will be a fully-functioning combined GPS/GLONASS receiver. This is only one
possible application of the PowerPak II; it can also be used by a system integrator to test and evaluate
MiLLennium-GLONASS GPSCards.
F.1.1 FEATURES
The PowerPak II enclosure comes with the following:
•
a mounting enclosure complete with a power converter and PCB interconnect back plane
•
two serial-data communication ports
•
an I/O port for strobe signals
•
an input RF port
•
an input power port
•
an input port capable of interfacing with an external oscillator
GPS/GLONASS Receiver User Manual Rev 1
Figure F.1 PowerPak II Enclosure
F PowerPak II Enclosure
73
Advertisement
Table of Contents
