Furuno FS-1575 Service Manual page 574

84. All stations. (Repeat 3 times) This is (Own ship name & call sign).
MMSI xxxxxxxxx. Our position is 50°00.0000'N,120°00.0000'E. Cancel my
DISTRESS ALERT in 05/JUN/2010.21:00. [ENTER]
frequency
This message goes off when the [ENTER] knob is pressed while a message saying
"Sent CANCEL MSG. Go to VOICE CANCELLATION" is displayed.
The condition for deleting this message is that the [ENTER] knob is pressed or the
handset is hooked on (the cancellation of call is completed).
85. There is finished session. [CANCEL]: Close window
This message goes off when a new procedure is booted due to the reception of
DSC message with the maximum size of procedure tab, and the lowest-priority
procedure is automatically deleted. The condition for deleting the message is that
the [CANCEL] key is pressed.
86. ADDRESS BOOK registered
This message goes off when DSC message is registered in the address-book by
pressing the [9] key on the DSC INFO window. The condition for deleting the
message is that the [CANCEL] key is pressed.
87. Wait for TX end.
This message goes off when the subsequent transmission is performed while DSC
message is being transmitted.
The condition for deleting the message is that the previous transmission is
completed.
88. Unacceptable! Frequency not within usable range. [CANCEL]: Close window
This message goes off when User Option on the Individual (Routine) Message
Reception window is set to "Accept" and alert/safety frequency is suggested as
"COMM FREQ." The condition for deleting the message is that the [CANCEL]
key is pressed.
89. Cannot ACK option Received message: invalid
This message goes off when User Option on the DSC Message Reception window
is set to "ACK." This case occurs when part of data of received DSC message is
destroyed to disable the transmission of acknowledgement message. The condition
for deleting the message is that the [CANCEL] key is pressed.
90. Cannot RELAY option
This message goes off when User Option on the Distress Alert Reception window
is set to "RELAY." This case occurs when part of data of received DSC message is
destroyed to disable the transmission of acknowledgement message. The condition
for deleting the message is that the [CANCEL] key is pressed.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
[CANCEL]: Close window
Received message: invalid [CANCEL]: Close window
AP2-12
Appendix 2. Message List
：
Selecting next
[CANCEL]: Close window