Setting; List Of Setting Menus - Furuno FS-1575 Service Manual

4.15 IB-585 Setting

4.15.1 List of Setting Menus

The following table shows a list of related setting menus.
Setting Menu
F3:Operate 6. Manual Reception
4. Answerback Code Entry
5. Group ID Entry (4/5 digit)
F5:Station
6. Group ID Entry (9 digit)
7. Select ID Entry (4/5 digit)
8. Select ID Entry (9 digit)
Slave Delay
TX/RX MSG Save
Edit before sending
TX Power
F6:System
Header/Footer
Time System
Time & Date
** Window color
Language
Printer Indent
F1:Setup
All clear
Import Settings
Export Settings
Error Count
Note) • Enter the changed password in capital letter. (in "caps lock" mode).
• To save set value to a SD card, execute "Export Settings" of [F11] Menu.
To incorporate the set value saved to the SD card in the IB-585, execute "Import
Settings."
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Table 4.15.1 List of Setting Menus
Factory
Set Value
Set
AUTO AUTO, ARQ, FEC
MMSI+CS(4digit)
―
+X
―
―
― Sell call number
― MMSI
12 msec 10-50msec
OFF ON, OFF
OFF ON, OFF
HIGH - LOW
OFF ON, OFF
OFF, UTC, SMT,
UTC
JST
Window color
- setup
Default
Normal, Norway,
Normal
Sweden, UK
OFF ON, OFF
Disp Disp, None
4-107
4.15 IB-585 Setting
Remark
Changed
See Note)
PASSWORD
"ANSWER CODE"
Changed
See Note)
PASSWORD
"ID CODE"
Changed
See Note)
PASSWORD
"DP6"
Leave "Slave Delay"
set to 12 msec!!
Setting to "ON" will
initiate
communication and
display
communication
information upon
completion.
Calibrated with RTC
time data of FS-xx75
Changed
See Note)
PASSWORD
"DP6"