Ac/Dc Power Unit Setting; Pr-850A - Furuno FS-1575 Service Manual

Ssb radiotelephone

Hide thumbs Also See for FS-1575:

Table of Contents

4.16 AC/DC Power Unit Setting

Make changes to the input power supply voltage cable connections of the transformer

according to the ship's main power supply. The input power supply voltage can be set

to 100, 110, 120, 200, 220, or 240VAC. The factory set is 220VAC. When the input

voltage is changed, replace the label indicating the input voltage.

100VAC Power Supply Input Voltage

120VAC Power Supply Input Voltage

Fig. 4.16.1 PR-850A Input Power Supply Voltage

CONFIDENTIAL (internal use only)

This confidential document is used only by FURUNO authorized persons.

It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.

220VAC Power Supply

Input Voltage (Factory set)

4.16 AC/DC Power Unit Setting

110VAC Power Supply Input Voltage

200VAC Power Supply Input Voltage

240VAC Power Supply Input Voltage

Fs-2575 Fs-5075