Service: Restore Factory Settings; Types Of Memory Clear Menus - Furuno FS-1575 Service Manual

6.4 SERVICE: RESTORE FACTORY SETTINGS

To restore factory settings, select [MENU] -> 9.SERVICE -> 4.RESTORE FACTORY
SETTINGS.

6.4.1 Types of Memory Clear Menus

Memory clear menus include "MMSI CLEAR," "RESTORE FACTORY SETTINGS,"
and "CLEAR ALL."
Clear Menu
Returns to factory settings,
except clearing of the following:
RESTORE
・MMSI
FACTORY
SETTINGS ・Adjusted values
・MAC address
Clears all memories except
CLEAR ALL
MMSI and MAC addresses.
MMSI
Clears MMSI.
CLEAR
Note) Adjusted values:
1) Set value of power data
Select [MENU] -> 9. SERVICE -> 3.RT SETUP -> Any of the following:
2) Set value of REF OSC
Select [MENU] -> 9.SERVICE -> 3.RT SETUP -> REF OSC.
3) Set value of LINE IN / LINE OUT
Select [MENU] -> 9.SERVICE -> 3.RT SETUP -> LINE IN or LINE OUT.
4) Set value of DISTRESS ALARM
Select [MENU] -> 9.SERVICE -> 2.DSC SETUP -> DISTRESS ALARM.
** FS-2575C: Individually back up the set value. **
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Table 6.4.1 Types of Memory Clear Menus
Function
Select [MENU] -> 9.SERVICE ->
4. RESTORE FACTORY SETTINGS,
See Note
） and then return to factory setting.
Press the [S1: MMSI] switch on the T-IF
board, and then enter the password.
Press the [S1: MMSI] switch on the T-IF
board, and then enter the password.
4.TX PWR (FREQ), 5.TX. PWR (USER CH),
6. TX PWR (TUNE), 7.TX PWR (SELCALL)
6-21
6.4 SERVICE : RESTOR FACTORY SETTINGS
Clear Operation