Clear Procedure; Restore Factory Settings; Clear All; Mmsi Clear - Furuno FS-1575 Service Manual

6.4.2 Clear Procedure

1. RESTORE FACTORY SETTINGS

1) Select [MENU] -> 9.SERVICE -> 4.RESTORE FACTORY SETTINGS, and then
press the [ENTER] knob.
2) A message saying "Initialize Settings OK?" will appear on the window. Click
"Yes," and then press the [ENTER] knob.
3) The window will fade out to restore factory settings. Subsequently, a message
saying "Initializing..." will appear, and then the "RT SETUP" window will open.

2. CLEAR ALL

For details, refer to information on page 4-4.

3. MMSI CLEAR

For details, refer to information on page 4-4.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
6.4 SERVICE : RESTOR FACTORY SETTINGS
6-22