4.3.3 [3. PRINT]
This submenu is used to make printing mode setting to MANUAL or AUTO.
The setting is available for TX MSG, RX MSG, and DAILY TEST.
• TX MSG: Prints out all transmitted messages, the DSC calls of which have been
made.
• RX MSG: Prints out all received DSC messages.
• DAILY TEST: Prints out the results of the following tests when conducted.
1) [MENU] -> 1.TEST -> "1.DAILY TEST"
2) [MENU] -> 1.TEST -> "2.TX SELF TEST"
3) [MENU] -> 9.SERVICE -> 3.RT SETUP -> "2.SELF CHECK"
Besides the above, the following items are printed out:
• Individual messages contained in the "RX DISTRESS," "RX GENERAL," and
"TX" tabs when selecting [MENU] -> 3.LOG
• [MENU] -> 9.SERVICE -> 6.MAINTENANCE LOG -> 2.ERROR LOG
• Messages transmitted using [OTHER DSC MSG]
• Messages transmitted using [DISTRESS MSG], and
• [MENU] -> 9.SERVICE -> 5.TEST -> 1.VERSION
To print out each message, operate the key following the operation guide displayed at
the bottom of the relevant window.
Printout Examples
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Sample: DAILY TEST RESULT
[MENU] -> 1.TEST -> 1.DAILY TEST
4-13
4.3 SYSTEM