Making Printer And Language Setting; Switching Between English And Russian Modes - Furuno FS-1575 Service Manual

4.14.5 Making Printer and Language Setting

Press the [F1] key while pressing the [Fn] key. The Printer & Language Setup window
will appear. Typing the password: "DP6" in capital letter. It will allow for making
printer and language setting.
Language
Printer
To make language setting, assign the local character code to a specific key.
To send "%" in UK mode, use the [⊐] key. To send "@" also in UK mode, use the [ ⊏ ]
key. To create a micro command, use the [Shift] and [2] keys.
Key
Language

4.14.6 Switching between English and Russian Modes

Switching to Russian mode
Turn ON the power supply while pressing the [R] key. The [R] key should be pressed
and held until the window is displayed in "Russian". To switch the language of
message to be transmitted, hold down the [Shift] key and press the [Alt] key. English
and Russian letters are automatically identified and displayed.
Switching Russian mode back to English mode
Turn ON the power supply while pressing the [E] key. The [E] key should be pressed
and held until the window is displayed in English.
Mode:
Switching language
English None
Switches using the
Russian
[Shift] and [Alt] keys.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Set up
Normal Norway Sweden UK
PP-510 OTHER
A
O o
@
Language of
message to be
transmitted
English
English
Russian
4-103
4.14 IB-583 Setting
Note) Unless DIP sw1 − #5 of
PP-510 is set to "ON,"
Norway characters and
" ￡ " are not printed out.
Language of message
received
English
Automatically identifies
between English and Russian
(according to the shift code
received).