Furuno FS-1575 Service Manual page 245

1. Registering an answerback code: AAB
This code should be composed of "MMSI + Four characters + X." "X" should be a ship
station.
As for the four characters, it is appropriate to use CS or a four-character ship's name
applied to the INMARSAT. Codes that are not composed as aforementioned cannot be
registered.
For example, supposing that the MMSI is "431456789," the ship's name of
"FURUNO," the four-character ship's name applied to the INMARSAT is "FURU," and
the CS is "JAAA," the answerback code is given as
• 431456789 FURU X, or
• 431456789 JAAA X
Procedure)
1) Select on "5. Answerback Code Entry," and then enter the answerback code.
2) When the answerback code is properly entered, press the [Enter] key. A command
prompt window saying "OK/Cancel" will appear. Click "OK," and then press the
[Enter] key.
3) The following confirmation message will appear. Then, press the [Enter] key again.
Caution
Confirm the "CODE" before pressing ENTER key.
You cannot change the CODE once it has been entered.
4) The display will return to the normal window. With this, the registration is
completed.
Re-registering a registered answerback code
Display the "5. Answerback Code Entry" window, and type "ANSWER
capital letter.
The registered answerback code will be deleted. Re-register the answerback code
following the procedure specified above.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Answerback Code Entry
Answerback Code
431456789 FURU X
Answerback Code Entry
Answerback Code
431456789 FURU X
4-109
_: Space
OK
Cancel
space
4.15 IB-585 Setting
CODE" in