6. Open "Main" in the bar menu, and then click on "Connect Target." A message
saying "Connect Target Start" will be displayed in the Status Column. Upon
completion of the connection, a menu tree of the FS-xx75 system will be displayed.
7. Click on a menu item in the menu tree. The popup window of the menu item will
appear on the Main window.
Note that the window just displays menus, but parameters are not up to date. To
update them, press the [RELOAD] key.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Appendix 1. Parameter Browser
AP1-6