Furuno FS-1575 Service Manual page 506

Procedure)
1. Turn OFF the power of the FS-xx75 system.
2. Connect the PC to the LAN port of the FS-xx75 system with a LAN cable.
Reference)
A straight or crossover LAN cable can be used. The T-CPU has the built-in
Auto-MDIX function that automatically identifies the LAN cable.
FS-2575T and FS-5075T
FS-1575T
3. Make setting of network connection (IP address) of the PC as shown below:
• IP address:
• Subnet mask:
• Default gateway:
Reference)
Set the last block of the IP address to "1" to "254" except "3."
"172.31.5.3" represents the IP address set to the FS-xx75 system.
If the IP address of the FS-xx75 system is changed, make IP address setting of
the PC according to the set network address.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
8.1 FS-xx75 Updating Program
LAN Port
172.31.5.1
255.255.0.0
No setting is needed.
8-6
LAN Port