Furuno FS-1575 Service Manual page 192

6) DSC AUTO ACK
• MF, MF/HF mode:
Displays an "AUTO ACK" icon in the upper left portion of the window.
• NON-GMDSS mode:
Not display the "AUTO ACK" icon on the operation display block.
Note) The "AUTO ACK" icon will be displayed when making setting to
[MENU] -> 6.DSC -> 3.ACK SETTINGS -> INDIVIDUAL ->
"AUTO (UNABLE)."
"AUTO ACK" icon
7) Multi procedure
• MF, MF/HF mode:
There is a multi-procedure tab area on the RT window of the operation display
block. Access to the tab area is given by using the "TAB" key. When the
[ENTER] knob is pressed while "NO ACTIVE" submenu is displayed, the
submenu will become "ACTIVE." When it becomes "ACTIVE," a "Blue line"
will be shown below the tab.
Multi Procedure Tab
• NON-GMDSS mode:
There is no multi-procedure tab area on the RT window of the operation display
block and [RADIO TELEPHONE] is displayed in place.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
RADIO TELEPHONE
RADIO TELEPHONE
4-56
4.7 SERVICE
ACTIVE