P-Browser; Software Erase; Debug Mode (On, Off) - Furuno FS-1575 Service Manual

3) Communications between the FS-xx75 and the IC-350 can be monitored.
Select [MENU] -> 9.SERVICE -> 6.MAINTENACE LOG -> 1.I/O MONITOR
-> "ALARM UNIT."
When pressing the [DISTRESS] button or the [TEST] button on the [MF/HF] of
the IC350, data from the IC-350 will be displayed.
Selecting [MENU] -> 9.SERVICE -> 7.OTHER -> "ALARM UNIT" ->
"DISCONNECT" also makes it possible to monitor the communications.

3. P-BROWSER

The Parameter Browser is software used to make settings of the FS-xx75 system and
save setting data from a PC. Connect the PC: Parameter Browser to the LAN port of the
FS-xx75T. For details, refer to Appendix-1.

4. SOFTWARE ERASE

This mode is used to delete C-CPU application program for the FS-2575C system.
For details, refer to information on page 6-47.

5. DEBUG MODE (ON, OFF)

This mode is used by R & D and displays debug information, mainly a TIMEOUT
counter.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
4-86
4.7 SERVICE