Ap1.4.1 Reload; Ap1.4.2 Save As - Furuno FS-1575 Service Manual

AP1.4.1 RELOAD

Procedure for displaying the setting parameters of the FS-xx75 on
General Menu Manager
Procedure)
1. Boot General Menu Manager, and then connect it to the FS-xx75 system.
1) Select [MENU] -> 9.SERVICE -> 7.OTHER -> P-BROWSER -> "ON";
2) Select Communication -> LAN Connect Settings -> Connect
3) Select Main -> Connect Target.
2. Select "RELOAD" from the list box of the "Batch Download/Upload" key, and then
click on the [RELOAD] key.
3. The FS-xx75 system will initiate downloading the setting parameters. Data transfer
status is displayed on the "Main Display" window. When the "Main Display"
window stops displaying the status, i.e., the reload of data is completed, the
download of the setting parameters is completed.
Reference)
"RELOAD" menu allows for downloading only the setting parameters of menus
whose checkboxes in the menu tree were checked.
The checkbox of "LOG" in the menu tree cannot be checked.

AP1.4.2 Save As

Procedure for saving the setting parameters of the FS-xx75 in a file
This procedure is used to save information on setting parameters that were loaded from
the FS-xx75 into General Menu Manager in the PC file. The file in which the setting
parameters were saved is referred to as the "XML file."
Transfer the setting
parameters to PC.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Transfer the setting
parameters to PC.
General Menu Manager
AP1-14
Appendix 1. Parameter Browser
General Menu Manager
XML File