Error Log - Furuno FS-1575 Service Manual

6.6.2 ERROR LOG

A maximum of 10 error logs are recorded and, when the number of error logs recorded
exceeds "10," the logs are erased in the order in which they were recorded. Errors that
are currently occurring can be checked by selecting [MENU] -> 8.ALARM.
All error logs contain the same items to be detected and displayed. For details, refer to
information on page 6-20.
Errors that are displayed on [MENU] -> 8.ALARM window are automatically erased
when the relevant event is eliminated. However, the ERROR LOG is not erased.
To erase any error log, select
• [MENU] -> 9.SERVICE -> 4.RESTORE FACTORY SETTINGS, or
• CLEAR ALL (Set "S1" on the T-IF board to "ON," and then enter the password.)
The ERROR LOG window displays the date of ZDA or RTC (ZDA is given priority)
and errors. Errors to be detected and displayed are as follows:
• TX PLL UNLOCK
• WR1 PLL UNLOCK
• MAIN AMP HEATED
• VC ERROR
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
• RX PLL UNLOCK
• WR2 PLL UNLOCK
• SHIP'S MAIN FAILURE
6-43
6.6 MAINTENANCE LOG