Trunk Group Routing For Disa - NEC Xen Topaz Programming Manual

IN
SA
SB
Description
Use Program 25-10 : Trunk Group Routing for DISA to assign the Trunk Group route chosen when a
user places a DISA call into the system and dials 9. Set Trunk Group Routing in Program 14-06. Enable or
disable the DISA caller's ability to dial 9 in Program 20-14-02. You assign a route to each DISA Class of
Service (1-15). The system assigns a DISA Class of Service to a call based on the password the DISA
caller dials.
When programming, you make a separate entry for each Night Service Mode.
Input Data
DISA User Number
Day/Night Mode
1-8
Conditions
None
Feature Cross Reference
♦
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-10(Trunk Group Routing for DISA):
1. Enter the programming mode.
2. Enter 25 10
25-10-01DISA-U1
Mode1 RouteTbl1
3. Enter the number of the item you want to program.
25-10-xxDISA-Uxx
xxxxx
4. Select the DISA User number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual
P
ROGRAM
25-10: T
RUNK
Route Table Number
0-25 (0 : No Setting)
216
Program 21 to 25
25: DID/DISA S
G R
ROUP OUTING FOR
1-15
Default
ETUP
DISA
1